High Drain Best Lithium 3.7V 5000mAh 26650 Panasonic Li Ion Battery
| Specifications: |
| Nominal Voltage | Average 3.7V |
| Nominal Capacity | 5000mAh |
| Max Charge Voltage | 4.2V |
| Energy Storage | 18.5Wh |
| Standard Charging Current | 1.5A(0.3C) |
| Charging Current | 5A Max |
| Discharge Current | 15A(3C Max)Continuous |
| Operation Temperature | Charging: 0 - 45 °c
Discharging: - 20 - 60 °c |
| Cycle Performance | 800 (80% of initial capacity at 0.2C rate, IEC Standard) |
| Dimensions(DxH) (max with tab) | 26.21mm(1.03") x 65.66 mm(2.58")
Tabs Dimension(LxWxH): 10mm(0.4") x 6.0mm(0.2") x 0.2mm(0.007") |
| Weight | 100grams |
| MOQ | 500PCS |
Visually inspecting your Panasonic 26650 batteries
The appearance of your battery
Should not have
Scratches
Rust
Discoloration
Dirt
Deformation
Leakage
You should also take a look at the pictures below and see that they match your own batteries.
Profile Shots
Notes on building lithium battery packs
If you are building rechargeable battery packs, Panasonic cautions the following on design:
Designing a lithium battery back
Can not connect to unauthorized chargers, equipment, or other devices
Terminal shape should be designed to prevent short-circuiting
Over current protection function to prevent external short circuits
Terminal shape designed so it can’t connect backwards and short-circuit
Design should prevent static, electrolyte, or water ingress* issues
Protection circuit should be accessible to be inspected
If electrolyte leaks out of the battery, it should not be able to reach the PCB
Cells should be fixed in place so they can’t jostle around
Use glue, and be careful if ultrasonic welding
Should be sealed shut so end users can’t touch cells
The protection circuit for the battery pack requires:
Overcharge protection
Over discharge protection
Over current protection
Avoid connecting cells together by soldering. Many DIYers weld directly on the top-cap of the batteries which can (pretty easily) lead to short-circuiting. As the negative and positive terminal meet right near the top of the battery, a bit of solder which slides to the edge of the battery is all it takes for a thermal runaway event.
The proper way to connect batteries is with lead plates and spot welding.
Water ingress is the leaking of water into an enclosure.
Product Tags:
|
|
3.7V Lithium Lifepo4 Battery Cells 5000mAh 26650 Cylindrical Shape 800 Times Cycle Images
|
